SoundLight DMX RDM Bedienungsanleitung Seite 19

PID 80FA DMX HOLD LEVEL
If supported, this fuction allows to set a DMX HOLD LEVEL which is output in case of control signal
missing. The level can be set in 8 bit or in 16 bit format. Only the upper n bits are considered, whe-
re n is the resolution specified in DEVICE INFO.
Calls: GET <param = none> (no parameter needed)
Return:
SET <param=DMX HOLD LEVEL [1 byte if n<=8, else 2 bytes]>
Return:
PEGEL BEI SIGNALAUSFALL
<param=DMX HOLD LEVEL [1 byte if n<=8, else 2 bytes]>
<param=none> (no parameter returned)