imilab C21 Benutzerhandbuch Seite 7

•Indicator Light
Steadyblue on: connected'device status isnormal
Flashing blue: network error
Flashing orange rapidty: waiting for connection
Flashingorange slowly: systemupgrade in progress
• Installing a MicroSD Card
Makesure that the power to IMILAB QI isalready disconnected.Adustthe camera lens
upward until the MicroSD slot is revealed, then insert the MicroSD card into the slot (the
side wth contact points must be facing down).
Note: Pleaseturn off the IMILAB QI's power supply before inserting or rernoving the
MicroSD card. Please use a genuine Micro SD card manufactured
with a reading/wrting speed of no less than Ul/Class 10.(Maximum support capacity
S 64 GB)
Restore Factory Settings
Pressand hold the resethole with fine needle, then you can hear the "resetsuccæd"
voice.
Data stored on the MicroSD card is not deleted.
by a qualified supplier,