imilab C21 Benutzerhandbuch Seite 5

3. Make sure to position the base unit so that the arrow
is poinbng up. Secure the base unit
the screwsinto the plastic anchors.
4. Matching the grooveson the bottom of the camera
unit Wth the raised
until the two surfaces are flush, then turn the camera unt
in either direction to lock it in postion.
Warning:
Toavoid any damages or injuries,the device must be securelyfastened to the
floor/wall as specified in the installation instructions.
A When mounting
please note that the wall must be abe to
weight.
place by tightening
area on the base unit. Press down
the security camera on a wall:
at least triple the product's