Herunterladen Diese Seite drucken

Sharp RP-111H Serviceanleitung Seite 4

Vorschau ausblenden Andere Handbücher für RP-111H:

Werbung

Caution
on Disassembly
Follow the below-mentioned notes when disassembling the
unit and reassembling it, to keep its safety and excellent
pe rformance
:
I.
Take
out
a record
of the unit.
2. Be sure to removethe input/output plug from the SA-
111H/E before starting to disassemblethe unit.
3. Take off nylon bands or wire holders where they need
be removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leadswhere they were
before disassembling.
4. Take sufficient care on static electricity of integrated
circuits and other circuits when servicing.
STEP
REMOVAL
1
Dust
cover
1. Lift it up to remove
1. Turntable
2
Turntable
2. Turntable
3
Tonearm
cover
1. Screw
1. Tonearm forwarding (• 1)
4
Top cabinet
2. Screw
3. Screw
Note
*I, Tonearm Forwarding
The tonearm can be moved in the following two ways;
1. To move the tonearm
by using the tonearm
bu tton ,
Push
the
tonearm
forward
reaches the desired position. If the tonearm arrives at the
lead-out position, it will automatically return to its rest
position.
2. To move the tonearm manually;
Holding
the plunger PWB, move the tonearm
desired position.
See Fig. 4-4.
Never attempt to grasp the tonearm when moving it, or
it may be damaged.
O Caution on Assembling the Cabinet
Prior to assembling the cabinet, be sure to turn on the
power switch.
CD
Figure
DISASSEMBLY
PROCEDURE
FIGURE
sheet
Drive
belt.
.
(A)xl
4-1
.
{B)x2
4-2
(C)x4
4-2
.
(D)x4
4-3
forward
button
until
the tonearm
to the
Where to position
the
tonearm
Plunger PWB
8
Turn table
Figure
(B)
Tonearm
cover
Top cabinet
Figure
(D)
Figure

Werbung

loading