SEH INU-100 Hardware-Installation Seite 9

supply voltage
Current input
Cable
Required stripping:
Relay
You can use the INU server's relay for various purposes in your
environment. For more information see the INU User Manual;
available at:
http://www.seh-technology.com/services/
downloads/industrial/inu-100.html
Type
Contact data:
switching voltage:
switching current:
switching power:
Hardware Installation Guide
- 12 V to 48 V DC
- power consumption max. 15 W
- redundant
at 12 V: - approx. 200 mA without load
- approx. 1200 mA with full load
on the USB ports
at 24 V: - approx. 110 mA without load
- approx. 550 mA with full load on
the USB ports
approx. 7 mm
Insertion: stripped end with or without end
terminals
potential-free changeover switch
max. 60 V DC or 42 V AC
max. 3 A
max. 180 VA for DC or max. 126 VA
for AC
[en] 6