ECOVACS DEEBOT N20 PRO Bedienungsanleitung Seite 18

No. Malfunction
Dust leakage occurs
10
during working.
The Reservoir/Dust
11
Bin drops off.
Driving Wheels are
12
stuck.
The robot fails to
13 perform Auto
Resume.
The cleaning task is
14 not conducted at the
scheduled time.
EN 18
Possible Cause
The outlet of the Dust Bin is blocked by foreign objects.
It is not properly installed.
Driving Wheels are tangled or obstructed by foreign
objects.
The robot is in Do Not Disturb mode.
The robot does not automatically return to the Station.
The schedule has been canceled.
The robot's battery is low.
The robot is in Do Not Disturb mode.
Solution
Remove the Dust Bin and clear the foreign objects on the outlet.
Make sure it clicks into place.
Rotate and press the Driving Wheels to check for any wrapping or
obstruction by foreign objects. If any foreign objects are found, please
clean them promptly. If this issue persists, please contact customer service
for assistance.
The robot cannot perform Auto Resume in Do Not Disturb mode.
Auto Resume will not take effect if you manually move the robot back to
the Station.
Reschedule the cleaning task.
Charge it.
The robot cannot perform scheduled cleaning in Do Not Disturb mode.