Herunterladen Diese Seite drucken

Kaco blueplanet hybrid 6.0 NH3 M2 WM OD IIG0 Bedienungsanleitung Seite 7

Vorschau ausblenden Andere Handbücher für blueplanet hybrid 6.0 NH3 M2 WM OD IIG0:

Werbung

DANGER
Danger to life due to electric shock when touching live system components in case of a ground fault!
If a ground fault occurs, parts of the system may still be live. Touching live parts and cables may result in
death or lethal injuries due to electric shock.
Disconnect the device from voltage and energy sources and ensure it cannot be reconnected before
working on the device.
Only touch the cables of the PV modules on their insulation.
Do not touch any parts of the substructure or frame of the PV array.
Do not connect PV strings with ground faults to the device.
WARNING
Danger to life due to electric shock from destruction of the measuring device due to overvoltage!
Overvoltage can damage a measuring device and result in voltage being present in the enclosure of the
measuring device. Touching the live enclosure of the measuring device results in death or lethal injuries due to
electric shock.
Only use measuring devices with a DC input voltage range of 1100 Vdc or higher.
CAUTION
Risk of burns due to high temperature!
Some parts of the enclosure can become hot during operation.
During operation, do not touch any parts other than the enclosure lid of the device.
CAUTION
Risk of injury due to weight of device!
Injuries may result if the device is lifted incorrectly or dropped while being transported or mounted.
Transport and lift the device carefully. Take the weight of the device into account.
Wear suitable personal protective equipment for all work on the device.
NOTE
Damage to the inverter due to the wire of battery grounded.
The hybrid inverter is a transformerless type. If the positive wire or negative wire of the battery connected to
the ground, the inverter will be damaged.
Make sure the battery's positive and negative cables are well insulated from ground.
KACO blueplanet hybrid 6.0 NH3 M2 KACO blueplanet hybrid 8.0 NH3 M3 KACO blueplanet hybrid 10.0 NH3 M3 KACO blueplanet hybrid 12.0 NH3 M3
Page 7

Werbung

loading

Diese Anleitung auch für:

Blueplanet hybrid 8.0 nh3 m3 wm od iig0Blueplanet hybrid 10.0 nh3 m3 wm od iig0Blueplanet hybrid 12.0 nh3 m3 wm od iig0