Kaco blueplanet hybrid 6.0 NH3 M2 WM OD IIG0 Bedienungsanleitung Seite 3

1 Overview of connection area
The connection for the AC supply is located on the housing in the lower right area. The DC input source is connected to the
DC plugs and DC sockets on the base plate.
With 3 MPPT (left) / With 2 MPPT (right)
Key
1 DC connector for Battery
2 DC integrated isolator switch
3 DC connector for PV generator
4 Connection for communication unit (Connect-NH)
2 Scope of delivery
A
G
Article Description
A Inverter
B Wall mounting bracket
Mounting accessory kit:
Wall fixings and hex bolts (4×)
M5×14 mm screw (2×)
C
Grounding washer (1×)
Terminal for OT/DT grounding (1×)
DC connector (Phoenix Sunclix):
D (6.0-12.0 NH3 M2)
(8.0-12.0 NH3 M3)
E
AC connector
KACO blueplanet hybrid 6.0 NH3 M2 KACO blueplanet hybrid 8.0 NH3 M3 KACO blueplanet hybrid 10.0 NH3 M3 KACO blueplanet hybrid 12.0 NH3 M3
B
C
H I
Quantity
1 piece
1 piece
1 set
2 pairs;
3 pairs
1 piece
5 Communication ports
6 AC connection socket
7 EPS connection socket
8 The position of the equipotential bonding
D
J
Article Description
F EPS connector
Terminal
G
Battery connector
H
Communication unit (Connect-NH)
I
External CT
J
Smart meter (Eastron SDM630-
Modbus V2)
K
Communication terminal package
L
Documentation
E F
L
K
Quantity
1 piece
5 pieces
1 pairs
1 piece
3 pieces
1 piece
1 set
1 set
Page 3