◾
If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
devices can reduce dust-related hazards.
◾
Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
MACHINE USE AND CARE
◾
Do not force the machine. Use the correct machine
for your application. The correct machine will do
the job better and safer at the rate for which it was
designed.
◾
Do not use the machine if the switch does not turn
it on and off. Any machine that cannot be controlled
with the switch is dangerous and must be repaired.
◾
Disconnect the plug from the power source and/or
the battery pack from the machine before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the machine accidentally.
◾
Store idle machines out of the reach of children
and do not allow persons unfamiliar with the
machine or these instructions to operate the
machine. Machines are dangerous in the hands of
untrained users.
◾
Maintain machines and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect
the machine's operation. If damaged, have the
machine repaired before use. Many accidents are
caused by poorly maintained power tools.
◾
Keep cutting machines sharp and clean. Properly
maintained cutting machines with sharp cutting edges
are less likely to bind and are easier to control.
◾
Use the machine, accessories and machine bits
etc. in accordance with these instructions, taking
into account the working conditions and the work
to be performed. Use of the machine for operations
different from those intended could result in a
hazardous situation.
◾
Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the machine in unexpected situations.
◾
This 56 V power head PHX1600 may be used
with only the following EGO attachments or
subsequently introduced by EGO for use with this
power head.
– Use only with the battery packs and chargers as
list below.
– When using with specific EGO attachments, for
safety purpose, to keep balance during operation,
please select the appropriate battery packs as list
below:
56 VOLT MULTI TOOL POWER HEAD — PHX1600
EN
7