Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BATTERY-STATUS INDICATOR AND SPEED INDICATOR
EN
The battery-status indicator shows the charge level and the working status of the battery pack, and the speed indicator
shows the working status of the machine as shown in the chart below. The battery-status indicator and the speed
indicator will illuminate when the machine is started or the speed mode button is pressed.
Indicator Lights
Battery-status
Indicator
Speed Indicator
(the illustration
shows the high
speed)
Battery High-temperature Protection
If the battery temperature exceeds 70°C during operation,
the temperature-protection circuit will immediately
shut off the machine to protect the battery pack from
overheating damage. The battery-status indicator will
glow solid orange. Release the trigger and wait until the
overheated battery cools down and the indicator turns
green, then restart the machine.
Battery Electronics Error Protection
When the battery pack electronics error occurs, the
battery-status indictor will flash red/green alternately
and the machine will shut off in 3 seconds. Replace the
battery pack or contact EGO customer service.
12
56 VOLT MULTI TOOL POWER HEAD — PHX1600
Solid green
Flashing green
Solid red
Flashing red
Solid orange
Flashing red/green
alternately
Solid green
Solid orange
Flashing orange
Meaning
Battery charge level of 20% to 100%
Battery charge level of 10% to 20%
Battery charge level of less than 10%
The battery pack charge is nearly depleted and needs
to be charged immediately.
The battery pack is overheated. Cool the battery pack
until the temperature drops below 67°C. See "Battery
High-temperature Protection" below.
The battery pack electronics error. Replace the battery
pack or contact EGO customer service. See
"Battery Electronics Error Protection".
The machine is working properly.
The machine is overheated. Cool the machine until the
temperature drops below 80°C. See "Machine High-
temperature Protection" below.
The machine is overloaded. See "Machine Overload
Protection" below.
Machine Overload Protection
This machine features a built-in overload circuit
protection. When the machine is overloaded, the motor
will stop and the speed indicator will flash orange.
Remove the battery pack from the machine, then reattach
the battery pack and restart the machine. Decrease the
load on the machine, avoid too long or oversize cutting
line or cutting of the heavy/woody shrubs.
Machine High-temperature Protection
If the machine temperature exceeds 90°C during
operation, the temperature-protection circuit will
immediately shut off the machine to prevent overheating
damage. The speed indicator will glow solid orange.
Release the trigger and wait until the overheated machine
cools down and the speed indicator turns green, then
restart the machine.
Werbung
