Troubleshooting - Meec Tools 025269 Bedienungsanleitung

10 Troubleshooting

Error
The product does not start.
The motor looses power
The grass catcher bag
does not get full.
Cause
The battery pack is not connected
correctly.
The battery has been discharged.
The discharge chute is clogged
Incorrect cutting height, the grass is too
high and the cutting height is adjusted to
low.
Incorrect cutting height.
The discharge chute is clogged
The product does not cut correctly, the
blade is dull.
The discharge chute is clogged.
The indicator opening is dirty.
The product does not cut correctly, the
blade is dull.
Action
Do a check so that the battery pack is connected
correctly.
Do a check and make sure the battery is charged.
Do a check and remove the grass that got stuck.
Adjust the cutting height to applicable height.
Refer to"4.1 To adjust the cutting height" on page
48
Adjust the cutting height to applicable height.
Refer to"4.1 To adjust the cutting height" on page
48
Do a check and remove the grass that got stuck.
Do a check, replace or resharpen the blade.
Do a check and remove the grass that got stuck.
Do a check so that the opening of the indicator is
clean. Clean if necessary.
Do a check, replace or resharpen the blade.
51