ECO
15. Motor output
16. Dust container full
17. Battery charge level
6. Mounting the wall bracket
DANGER!
Risk of electric shock!
Risk of electric shock when drilling holes into a wall!
When mounting the wall bracket on the wall, install it in a suitable location and take care
not to hit any hidden electrical cables or pipework when drilling.
The supplied wall bracket (5) can be used to store the vacuum cleaner safely on a wall.
Select a position in a dry location close to a mains socket, where the vacuum cleaner is
not exposed to direct sunlight.
Make sure there are no hidden electrical cables or pipework.
Mark the two drill holes for the wall bracket.
Drill the 2 holes where you made your markings, so you can insert the screws in them.
Push the wall plugs into the drilled holes.
Before mounting, insert the two accessory holders into the recesses on the wall bracket.
Screw the wall bracket securely into the two drill holes using the screws provided.
138
AUTO
MAX
Abb. 2 – Controls
18. Function mode display
19. Brush blocked
20. Control field: set function mode
15
16
17
18
19
20