Specifications; General Specifications - Sony mj620 Bedienungsanleitung

5. Specifications

5-1. General specifications

Model name
Number of divisions
(number of interpolations)
Minimum phase difference
Output signal
Reference point signals
Output circuit
Maximum response speed
Alarm signal
Power supply
Power consumption
Operating temperature range
Storage temperature range
Mass
Accessories
Applicable standards
MJ620
MJ620
800, 400, 160, 80, 40, 32
See "3-3-2. Output phase difference."
See Fig. 3-1 and 3-2.
Reference point signals are output during one cycle of
the A phase signal (Z mode) or when both the A and B
phase signals are high level (1/4 mode), depending on
the setting.
Voltage-differential line driver (AM26C31)
PCA, PCB, PCZ, ALARM
* *
PCA, PCB, PCZ, ALARM
Use the AM26C31 or an equivalent product for the
receiver circuit.
See "3-6. Maximum response speed."
See "3-7. Alarm signal."
4.75 to 5.25 V DC
2.2 W (when PL101 Series is connected)
0 to +45dC
_20 to +60dC
60 g
Instruction manual.....1
EN55011 Group 1 Class A/91
EN50 082-2/95
FCC Part 15 Subpart B Class A Digital Device
ICES-003 Class A Digital Device
* *
21
(E)