Herunterladen Inhalt Inhalt Diese Seite drucken

Notes To Users; General Precautions; Precautions; Installation - Sony mj620 Bedienungsanleitung

Interpolator
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1. Notes to Users

1-1. General precautions

When using Sony Manufacturing Systems Corporation products, observe the following
general precautions along with those given specifically in this manual to ensure proper use
of the products.
. Before and during operations, be sure to check that our products function properly.
. Provide adequate safety measures to prevent damage in case our products Should develop
a malfunction.
. Use for specifications or purposes not indicated here and modification of our products
will void any warranty of the functions and performance as specified for our products.
. Depending upon the operating environmental conditions, the functions and performance
as noted in this manual may not be attained when using our products in combination with
other equipment. Make a thorough study of the compatibility in advance.

1-2. Precautions

When installing the MJ620, observe the following precautions to prevent noise interference
from other equipment.
. Use noise-preventive mechanisms for the relays, solenoids and motors connected to the
MJ620.
. Take preventive steps when noise from other equipment may disturb the power supply
line to the units.
. Shield the output cable correctly according to the instruction manual.
Be sure to ground the MJ620 with an earth wire or by mounting it on the machine with
screws.
. The MZ5 case, sold separately, is available for the MJ620. This case is approved under
the applicable standards. We recommend using the case if the MJ620 is being installed in
an environment that is subject to electronic noise.

1-3. Installation

. Use the MJ620 in the temperature range of 0 to 45dC / 32 to 113dF. Do not expose it to
sunlight or sources of heat. A well-ventilated place is preferable.
. Separately route the head cable and output cable from the power line.
. When installing the Interpolator in a place where it may be exposed to water splashes,
protect it from water by providing a cover or other protection.
MJ620
1
(E)

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis