Endress+Hauser Memobase Plus CYZ71D Betriebsanleitung Seite 16

Safety instructions
6 Safety instructions
6.1 Requirements for personnel
‣
Installation, commissioning, operation and maintenance of the
measuring system must only be carried out by trained technical
personnel.
‣
The technical personnel must be authorized by the plant operator to carry
out the specified activities.
‣
The electrical connection may only be performed by an electrical
technician.
‣
The technical personnel must have read and understood these Operating
Instructions and must follow the instructions they contain.
‣
Measuring point faults may only be rectified by authorized and specially
trained personnel.
Repairs not described in the enclosed Operating Instructions may only
be carried out directly at the manufacturer' s or by the service
organization.
6.2 Designated use
Memobase Plus is a measurement and calibration software offering central
database management for sensors incorporating Memosens technology. It
can be used to calibrate, adjust and manage sensors in a laboratory.
Memobase Plus is designed for use in the following applications:
• Laboratories
• Process-oriented workbench applications in non-hazardous areas
Memobase Plus cannot be used to replace a process transmitter, as
communication with the control system is not supported.
"MemoLink" is used as a Memosens/USB interface converter for "Memobase
Plus" computer software. Memosens sensors with and without Ex approval
are supported. Recommended areas of application are preferably laboratory
applications for calibration and functional testing.
Any use other than that described jeopardizes the safety of staff and of the
entire measuring system and is thus not permitted.
The manufacturer is not liable for damage resulting from incorrect or
non-designated use.
16
Memobase Plus CYZ71D
Endress+Hauser