Simpex Basic Power Clean Bedienungsanleitung Seite 30

CleANINg
Note:
The appliance does not include any parts that are required to be maintained by
you, do not disassemble it and do not attempt to repair it yourself.
1. emptying the dust container (6):
1) Turn the appliance off. Press the dust container release button (8) to open the
dust container cover (7) (see Fig. 5).
Attention: When the dust container cover (7) is opened, the dirt will fall out
straight away. Hold the dust container (6) over a waste bin.
2) Remove the insert (23) from the dust container (6) by turning it. Empty the dust
container (6) and clean it.
Fig. 5
2. Cleaning the dust container filter:
1) Observe the "Lock" and "Release" symbols on the top of the HEPA filter (22).
Move them as indicated by the arrow to remove the HEPA filter (22) from the
insert (23) (see Fig. 7).
2) Rinse the parts with water and allow them to air-dry completely before putting
them back into the dust container (6).
Fig. 7
30
2023-11 SIMPEX Basic Akku-Stielstaubsauger Power Clean 33080.indd 30
Fig. 6
HEPA-filter (22)
insert (23)
Fig. 8
19.01.24 14:45