Simpex Basic Power Clean Bedienungsanleitung Seite 28

OPerAtION
3. if you want to use the 2-in-1 attachment (11), attach it either directly to the
suction opening (1) or instead of the floor brush (13) to the other end of the
extension tube (15), as required.
Note: The floor brush (13) can also be attached directly to the suction opening
(1).
4. Press the on/off button (21) to turn the appliance on. The appliance will run at
normal speed. The indicator lights of the battery (17) and of the floor brush (12)
will light up.
5. if the turbo speed button (19) is pressed, the appliance will switch to turbo
speed. if the button is pressed again, the appliance will return to normal speed.
6. After use press the on/off button (21) to turn the appliance off.
NOTE: Please keep an eye on the dust filling level during use, and empty the
dust container (6) before the MAX indicator level is reached. This appliance is
designed for dry vacuuming only.
Attention: The suction opening must be cleared of any obstacles, otherwise the
motor might overheat and be damaged.
if you want to use the wall mount (10), simply place it on the wall and attach it
using the screws supplied. Store the appliance on the wall mount. You find the
hook (a) provided for this purpose on the dust container cover (7) (see Fig. 4).
Recommended height: 87 cm (see Fig. 3).
Fig. 3
28
2023-11 SIMPEX Basic Akku-Stielstaubsauger Power Clean 33080.indd 28
Fig. 4
a
19.01.24 14:44