Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• CAUTION — Some parts of this product can become very hot and cause burns. Particular
attention
has to be given where
• Regarding the instructions
the manual.
• Do not use this heater if it has been dropped.
• Do not use if there are visible signs of damage to the heater.
• Use this heater
on a horizontal
• WARNING:
Do not use this heater in small rooms when they are occupied by persons not
capable of leaving the room on their own, unless constant supervision
• WARNING:
To reduce the risk of fire, keep textiles, curtains, or any other flammable
material
a minimum
Operating
Instructions
Never cover the heater or obstruct
cause
overheating
Never move the heater when it is operating,
Please turn the heater off if you want to move it.
When you turn the heater on for the first time you may notice a slight odor, this is harmless
and will stop after a short amount
Heater
Control
Panel
820-083:
Insert Plug Into Socket
The following switches are located under the controls cover at the front of the heater.
• Switch ( 3a ) Switchs ON/OFF electricity supply to the heater and flame effect.
Note: This switch must be in the ON position for heating operation.
• Switch ( 3b) Switchs ON/OFF 900W heat output
• Switch ( 3c ) Switchs ON/OFF 1800W output with switch 3b
Note: The flame effect can be operated with or without heat.
• Rotate thermostat control (I ) clockwise or anti-clockwise
temperature.
820-084/820-085:
The
control
switch
is located
children
for replacing bulb, thanks to refer to the below paragraph of
and stable surface,
distance
of
1 m from
the opening
and consequent
risk
of time.
1
on the front
of the heater
and vulnerable
people
or fix it to the wall, as applicable.
the
air outlet.
at the base of the heater, this could
of fire.
this could cause the bulb breakdown.
3a
3b
to achieve desired room
as below.
3
are present.
is provided.
Werbung
