Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. MAINTENANCE
6.1. GENERAL
1. Whether in use or in storage, please do not exceed the specification requirements to
avoid any possible damage or danger during use
2. Do not place this instrument under high temperature or expose to direct sunlight
3. Be sure to turn the instrument off after use. For long time storage, remove the battery
to avoid leakage of battery liquid that would damage the internal parts.
6.2. BATTERY REPLACEMENT
When the symbol "
Only expert and trained technicians must perform this operation. Remove all
the probes from the devices under test before replacing the battery.
1. Switch off the instrument
2. Remove the temperature probe
3. Remove the battery cover (see Fig. 1 – part 13)
4. Remove the battery from the battery compartment disconnecting it
5. Set the new battery into battery compartment
6. Replace the battery compartment cover
7. Follow the appropriate battery disposal methods for your area
6.3.
CLEANING
To clean the instrument use a soft dry cloth. Never use a wet cloth, solvents or water, etc.
6.4.
END OF LIFE
CAUTION: this symbol indicates that equipment, its accessories and battery
shall be subject to a separate collection and proper disposal.
" is displayed replace battery.
CAUTION
EN – 8
HTA103
Werbung
