Werbung
Verfügbare Sprachen
Verfügbare Sprachen
HTA103
2. GENERAL DESCRIPTION
The instrument can perform the following measurements:
• Temperature measurement in °C/°F/°K by means of K, J and T type probes
• Maximum, minimum value measurements
• Data HOLD
• Offset adjustment for compensation of external probes
• Backlight
• Auto Power OFF
Each function could be selected via the relative key. The selected quantity appears on a
high-contrast display with indication of measurement unit and of the active functions. As for
the use of function keys please see § 4.2.
3. PREPARATION FOR USE
3.1. INITIAL
The instrument has been checked from every point of view before shipment. Every care
has been taken to make sure that the instrument reaches you in perfect conditions.
However, it's advisable to make a rapid check in order to detect any damage, which may
have occurred in transit. Should this be the case, enter immediately the usual claims with
the carrier. Make sure that all the accessories listed in § 7.3 are contained in the package.
In case of discrepancies contact the dealer. In case you need to return the tester, please
keep to the instructions given in § 8.
3.2. POWER SUPPLY
The instrument is supplied by 1x9V alkaline battery type IEC 6F22 included in the
package. Battery life: about 200 hours. When battery is low, the symbol "
" is
displayed. Replace it immediately, following the instructions given in § 6.2.
3.3. STORAGE
In order to guarantee measurements' accuracy after a period of storage under extreme
environmental conditions, wait until the instrument goes back to normal measuring
conditions (see § 7.2.1).
EN – 3
Werbung
