Breitling COCKPIT B50 ORBITER Bedienungsanleitung Seite 76

3. InItIALIzInG tHe wAtcH
When used for the first time, or after having been charged, the watch guides the
user though the following sequence:
1. Pull the crown into position 2 (
function.
2. Synchronize (
SyNChro
display (see chapter 7.a).
3. Set the exact time on the UTC timezone (
main time base – and not the local time (see chapter 4)
4. Set the date (
SETDATE
5. Set the main TIME zone (
time (see chapter 6).
6. Press the crown back to neutral position 1.
Depending on the state of the watch prior to being charged, only some, if any,
settings will be required.
N.B.: It is only possible to adjust the minutes in one-minute increments in
In or mode, the hours are adjusted depending on the difference with
TIME TIME 2
UTC time and the minutes in 15-minute increments. The seconds on the other hand,
can be adjusted precisely in each of the timezones and will automatically be updated
in the other zones.
pUll CroWN
) the hour, minute and seconds hands with the digital
SET UTC
) (see chapter 5)
) with regard to the difference with the UTC
SETTIME
75
) in order to activate the settings
), which constitutes the watch's
mode.
UTC