The alarm sounds for 20 seconds, with a 10 second reminder after 2 minutes. The
upper screen displays
0). The alarm can be stopped by pressing one of the two pushpieces or the crown.
15. coUntDown (
TIMEr
a) setting (
)
SET TMr
•
Select the
function by turning the crown.
TIMEr
•
Pull the crown into position 2 (
(
), minutes (
hoUr
MINUTE
59 minutes and 59 seconds, confirming it each time by pressing P2.
•
Press the crown back into neutral position 1.
b) Use
•
Pressing P1 will start the timer (
•
Pressing P1 a second time will stop it (
it (
).
TMr rUN
•
When the timer is working, a long press on P2 will reset the original settings
(
).
rESET
by flashing (alternately with the
AlCU
)
) and turning the crown, adjust the hours
SET TMr
) and seconds (
TMr rUN
TMrSTop
102
xxDAy(S)
) up to a maximum of 99 hours,
SECoND
).
), while pressing again will restart
if different from