Werbung
Verfügbare Sprachen
Verfügbare Sprachen
c) erasing one or more blocks
• To erase the active block, press on P2 for a long time when the crown in is
neutral position 1 (
• To erase all the blocks at once, proceed as follows:
– Pull the crown into position 2.
– Press P2 for a long time (
– Press the crown back into neutral position 1.
13. coUntDown coUntUP cLocK (
The
(CountDown CountUp ClocK) function or MET (Mission Elapsed
CDCUClK
Time) is used for more or less long term missions, or regattas, for example. It
offers two possibilities:
• Engage directly a countdown (with a duration that can be configured) and
timing:
function.
C-DoWN
• Conduct "absolute timing" with a zero or non-zero value start (by adding an
"offset"):
function.
C-Up
a) setting (
)
SETCDCU
• Select the
CDCUClK
• Pull the crown into position 2 (the upper screen will show
).
rESET
).
EMpTy
CDCUClK
function by turning the crown.
99
)
SETCDCU
).
Werbung
