End Of Work - Kummert Protab Bedienungsanleitung

Switch mode
Some cameras have several inspection
modes. To switch between modes, press the
3D-joystick.
Activate release mode (CamFlex
To activate the release mode, pull the
3D-Joystick up.
Move image or camera
Move the 3D-Joystick up, down, left or right.
Moving the crawler or PushBuddy forwards
or backwards
Press the left mini joystick forward to move the
crawler or camera forward and backward to
move the crawler or camera backward.
Steering the crawler to the left or to the right
Press the toggle switch to the left or to the
right to move the crawler in the corresponding
direction.
Taking a picture of the surroundings /
Setting a measurement point
Further information can be found in the
operation manual of can3D
TIP For further information please read the operation manual of can3D

END OF WORK

Shut down the device via the software. Further information can be found in the operation
manual of the software.
EN
HD)
®
.
®
.
®
29 29