Preparation; Scope Of Delivery; Packaging; Storage - Kummert Protab Bedienungsanleitung

PREPARATION

Scope of delivery

TIP Claims for damages can only be asserted within the legal time for claims. Report
every fault as soon as it has been discovered.
The delivery is to be inspected for completeness and possible transport damage immediately
upon receipt. Report transport damages to the carrier immediately.
The standard scope of delivery includes:
• proTab
• Operating pen
• Operating pen tips for replacement
• USB-C Hub
• Instruction manual

Packaging

Packaging may also comprise materials added to the packages for the protection against
moisture or frost (e.g. silica gel bags, anti-freezing agents).

Storage

Always store the device under the following conditions:
• Do not store outdoors.
• Store in a dry and dust-free place.
• Protect the connectors of the device with the supplied protective caps.

Transport

When transporting the device in vehicles, always comply with the local security of loads
regulations. In addition, make sure that the device is protected against external forces.

PRODUCT DESCRIPTION

Brief description

proTab in combination with Profi NG is a basic device for inspection of pipelines. It is
connected to a camera or to a crawler using a reel or a cable drum. The device is used
to control the connected camera or the connected crawler. To use the device, can3D
can3D NG software is required, which is installed upon delivery.
®
22
or
®
EN