Frigelux CA155BDS Gebrauchsanweisung Seite 19

▪
Never put bottles or jars containing liquids in the freezer unless they are only filled to 2/3 of
their capacity, freezing expands the liquids and the container could explode.
▪
When unplugging the appliance, always hold the plug in your hands and do not pull on the cord.
▪
Do not expose the device to direct sunlight.
▪
The device must be kept away from candles, light fixtures and other naked flames, in order to
avoid the risk of fire.
▪
This appliance is intended exclusively for the storage of foodstuffs.
▪
The device is heavy. Be careful when moving it.
▪
If your device has wheels, remember that they are only used to facilitate small movements. Do
not move it on longer trips.
▪
Never use the device or its parts to lean on.
▪
To avoid falling objects and prevent damage to the device, do not overload the device
compartments.
To avoid contamination of food, please observe the following instructions:
•
Regularly clean food contact surfaces and accessible drainage systems.
•
Store raw meat and fish in suitable containers to avoid contact with any other food.
Warning! Cleaning and maintenance
▪
Before any maintenance, unplug the appliance and disconnect the power.
▪
Do not clean the device with metal objects, steam system, volatile oils, organic solvents or
abrasive components.
▪
Do not use sharp or pointed objects to remove the ice. Use a plastic scraper.
Important information about the installation!
▪
This refrigeration appliance is not intended to be used as a built-in appliance
▪
For the electrical connections to be correct, follow the instructions provided in this manual.
▪
Unpack the device and check that it is not visually damaged. Do not plug in the device if it is
damaged. Report any damage to the point of sale where you purchased it. In this case, keep
the packaging.
▪
It is recommended to wait at least four hours before connecting the device to the current, so
that the compressor is well supplied with oil.
▪
Good air circulation is necessary to avoid the risk of overheating. To ensure sufficient
ventilation, follow the installation instructions provided.
▪
As soon as possible, prevent the appliance from touching walls and/or coming into contact with
hot elements (compressor, condenser) in order to avoid the risk of fire. Always follow the
installation instructions carefully.
▪
The appliance should not be located next to radiators or
▪
Make sure that the sockets are accessible once the device is installed.
cooking fires.
19