Candy CP 8F9FFW Bedienungsanleitung Seite 132

SMART DOOR / CHILD LOCK
button
SMART DOOR
(only on some models)
This option activates a special device that
opens the door a few centimetres during or
at the end of the drying cycle (depending on
the programmes), favouring a more natural
and efficient drying of the dishes. The
duration of the selected cycle will be
automatically modified, to allow the rinsing
temperatures to be optimised, providing a
significant reduction in energy consumption.
Opening the door in the last stage of drying
enables air to be recirculated, eliminating
the risk of unpleasant odours.
When the door opens, the "SMART DOOR"
message will appear on the display.
This option will automatically be active
in the "ECO" programme. There is
however the option to deactivate it.
WARNING:
With this option selected, you must
not in any way prevent the door from
opening or force it to close, so as not
to damage the mechanism. Leave the
space in front of the door free and
before closing it, wait for the opening
device to reactivate.
CHILD LOCK
CHILD LOCK ACTIVATION
The dishwasher is equipped with an
electronic child
disables commands, thereby preventing
unwanted or accidental changes from being
made.
Child protection can
deactivated as follows:
1. Turn on the dishwasher by pressing and
holding the "ON/OFF"
lock. Child protection
be activated
button.
2. Press the "CHILD LOCK"
for about 5 seconds.
3. "CHILD LOCK ON" will appear on the
display and a short beep will be heard.
4. Only the "ON/OFF"
remain active.
5. Each time you press the disabled keys,
"LOCK" will appear on the display.
CHILD LOCK DEACTIVATION
1. Press the
button for about 5 seconds.
2. "LOCK OFF" will appear on the display
and a short beep will be heard.
Turning off the machine with the "ON/
OFF" button, the next time the
machine is switched on, the child
protection will be activated.
"NO SALT" warning light
When the "SALT" message appears on the
display or, where present, the relative light
comes on , fill the tank (see chapter on
"ADDING THE SALT").
If the setting level of the softener is set
to 0, this will never happen (see
chapter on setting the softener).
"NO RINSE AID" warning light
When the "RINSE AID" message appears
on the display or, where present, the
relative light comes on
chapter "FILLING RINSE AID").
or
If the RINSE AID level is set to 0, this
will never happen.
132
button will
"CHILD LOCK"
, fill the tank (see
button