Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Maxi Plates
(only on some models)
The Maxi Plates system (fig.10) has been
designed to provide the optimal washing
position thanks to two special supports for
up to 8 8 larger-than-standard size plates,
up to a diameter of 34.5cm (for example
pizza dishes).
WARNING:
After loading the basket make sure that
the spray arm rotates freely without
hitting dishes or kitchen utensils.
Cutlery basket
(only on some models)
The cutlery basket is intended to contain
cutlery of all kinds, excluding those of such
length as to interfere with the upper
sprinkler. The cutlery must be placed in the
appropriate spaces of the upper grids to
allow for optimal water passage. It is
possible to remove the upper grids by lifting
them and sliding them inside their seat
(fig.11).
You can adjust the height of the cutlery
basket handle by pulling or pushing the
handle (fig.12).
An example of the positioning of the cutlery
rack is shown in figure 8.
WARNING:
Knives and other utensils with sharp
points must be loaded in the basket
with their points down or placed in a
horizontal position.
Using the third basket
(only on some models)
Use the third basket to load the cutlery, as
shown in the image (fig.13).
Load knives with the sharp, cutting side
facing downwards.
113
Werbung
