Candy CP 8F9FFW Bedienungsanleitung Seite 131

INTERIOR LIGHT
(only on some models)
The innovative internal lighting system has
been designed according to high aesthetic
standards to make your dishwasher even
more functional. When you load or empty
the dishwasher, two powerful LED lights
illuminate the inside of the dishwasher.
The lights come on as soon as the machine
is turned on with the ON/OFF
After a period of 5 min. the dishwasher
goes into stand-by by turning off the lights.
After the end of the cycle, to use the
internal lighting again, press the ON/OFF
button.
The light is not active when the
machine is in the delayed start or
pause condition.
1. Switch on the dishwasher with the
"ON/OFF" button.
2. Keep the "OPTIONS"
pressed for about 5 sec.
3. The "SETTINGS" message appears on
the display.
4. By
pressing
SELECTION"
the successive
adjusted.
5. Select the "INTERIOR LIGHT" setting.
6. Press the "START/RESET"
to confirm the selected parameter.
7. Press the "PROGRAMME SELECTION"
buttons to choose the two
settings:
- INTERIOR LIGHT
- NO
button.
button
"PROGRAMME
the
key you can select
parameters to
button
8. Confirm your
"START/RESET"
- If the "INTERIOR LIGHT" setting is
confirmed,
appear on the display, which will scroll
continuously.
- If the "NO" setting is confirmed,
"INTERIOR LIGHT" will appear on the
display.
9. To exit the menu, press the "ON/OFF"
key.
FLOOR LIGHT
(only in models where present)
While the washing program is running, a
floor light is projected onto the floor under
the dishwasher door. When the wash cycles
are started, the light stays on until the end
of the wash cycle. To indicate the end of the
wash cycle, the floor light is activated
intermittently for 10 sec.
The light is not active when the
machine is in the delayed start or
pause condition.
The indication will not be visible if the
plinth panel is positioned forward or if
be
something is placed in front of the
information projector.
HYGIENE + button
(only on some models)
This option allows you to increase the
temperature and modify some parameters
of the washing cycle so the interior of the
machine can be effectively sanitized.
131
choice by pressing
.
"INTERIOR LIGHT" will