Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SOFTENER
For
SOFTENER
appropriate chapter.
RINSE AID
For
RINSE
AID
appropriate chapter.
BUZZER SELECTIONS AND SETTINGS
The buzzer signal that sounds upon
pressing the keys used for selecting and
setting washing functions and options can
be activated/deactivated as follows (it is
activated by default):
WARNING:
The buzzer signal will always remain
active when the machine is switched
on and off, at the start or end of a
washing cycle or in the event of a
problem or error with the machine.
1. Switch on the dishwasher with the
"ON/OFF"
button.
2. Keep the "OPTIONS"
pressed for about 5 sec.
3. The "SETTINGS" message appears on
the display.
4. By
pressing
SELECTION"
the
successive
adjusted.
5. Select the "BUZZER" setting.
6. Press the "START/RESET"
to confirm the selected parameter.
7. Press the "PROGRAM SELECTION"
buttons to choose the two
settings:
- YES
- NO
settings,
see
the
settings,
see
the
button
"PROGRAM
the
key you can select
parameters
to
button
8. Confirm
"START/RESET"
- If the setting is confirmed, "BUZZER"
will appear on the display and will scroll
continuously.
9. To exit the menu, press the "ON/OFF"
key.
MEMO FUNCTION
To enable storage of the last programme
used, proceed as follows:
1. Switch on the dishwasher with the
"ON/OFF"
2. Keep the "OPTIONS"
pressed for about 5 sec.
3. The "SETTINGS" message appears on
the display.
4. By
pressing
SELECTION"
the
successive
adjusted.
5. Select the "LAST USED" setting.
6. Press the "PROGRAM SELECTION"
buttons to choose the two
be
settings:
- "LAST USED"
- "NO"
7. Confirm
"START/RESET"
- If the setting is confirmed, "LAST
USED" will appear on the display and
will scroll continuously.
8. To exit the menu, press the "ON/OFF"
key.
130
your
choice
by
.
button.
"PROGRAM
the
key you can select
parameters
your
choice
by
.
pressing
button
to
be
pressing
Werbung
