Accessories Overview; Decommissioning - Genius Invictus Gebrauchsanleitung

GB
Use as a hand-held device
1. Disconnect the cleaner from the power supply and ensure that the appliance has cooled down. Remove the main
appliance by pressing the release buttons and removing the main unit (see fig. C).
2. You can connect the extension hose or the accessory adapter to the lower end of the main appliance until it clicks
into place (see fig. H).
3. Attach the various attachments to the front end of the extension hose or adapter and turn them clockwise until
they click into place. You can use the extension hose to extend the range.
4. Press the steam trigger on the back of the handle to activate the steam function. Steam is released as long as the
button is held and there is water in the fresh water tank (see fig. I).
5. By pressing the mode switch, you can choose between different vapour strengths.

Accessories overview

Accessories
Extension hose
Window attachment with
microfibre cover
Crevice brush
Angled nozzle
Cleaning scraper
Round brush
Wire brush

Decommissioning

To switch off the steam cleaner, deactivate the steam function and disconnect the mains plug from the socket.
„
To cool down, place the appliance on a surface where the residual moisture will not cause any damage. Allow the appliance to
„
cool down completely.
Turn the water tank cover anti-clockwise and open it, empty the water tank and allow it to dry completely.
„
Let the device cool down sufficiently before you remove the microfiber wiper.
„
You can wind the cable around the two designated hooks to save space during storage.
„
20
Instruction manual
Picture Application
To increase the range or flexible use of the
accessories.
For cleaning smaller surfaces such as windows
/ non-sensitive textiles.
For cleaning narrow joints, e.g. tile joints.
For cleaning hard-to-reach areas.
For stubborn dirt.
Stubborn dirt on scratch-resistant surfaces.
Stubborn dirt on scratch-resistant surfaces.