VEVOR APD24 Bedienungsanleitung Seite 4

handle.
1.2. The whole equipment is divided into three parts: fuselage body (A),
long supporting plate (B) and short pulling plate (C). As shown in the figure
(I).
1.3. Place the fuselage (A) inside the long support plate (B). Make the
higher end of fitting (B) close to the fuselage, as shown in figure (II). The
short pull-out plate (C) is placed on the long support plate (B) and can be
moved back and forth. The overall effect is shown in the figure (III).
figure (II)
figure (III)
- 3 -