Dometic CLIMATE CONTROL ACC3100 Bedienungsanleitung Seite 14

EN
Press the button for 3 s to activate the storage mode.
The displayed symbols flashes once and then disappears, excluding the
The indicator lights up.
Press the button for 3 s to deactivate the storage mode.
The symbols that were displayed before the STORAGE mode was activated are displayed in sequence on the
display.
8.4 Adjusting the light (optional)
The LED light strips can be dimmed in 3 different levels.
Press the button to adjust the brightness.
Each press of the
selection is repeated from the beginning.
8.5 Using the Dometic Climate App
The Dometic Climate App can be used to control the ventilation system via the mobile phone or to update the
soware of the ventilation system.
NOTE Depending on the screen in the Dometic Climate App, a < button is displayed, which allows to
switch to the previously displayed screen.
Pairing the ventilation system and the Dometic Climate App
NOTE Once the ventilation system is paired with the Dometic Climate App, the pairing is always activated
automatically as soon as the ventilation system, the Bluetooth of the mobile phone and the Dometic
Climate App are switched on again aer being switched off.
1. Download the Dometic Climate App.
Scan the QR code or follow the
2. Ensure the ventilation system is switched on.
3. Activate Bluetooth on the mobile phone.
4. Open the Dometic Climate App.
Settings for permissions appears.
5. Allow the permissions by tapping the corresponding answers.
The welcome screen appears.
6. Click the Add new device button.
7. Select the ventilation system.
14
button increases the brightness. Aer level 3, the LED light strips turn off and the level
link:qr.dometic.com/bdw7LR
button.