GardePro E6P Bedienungsanleitung Seite 7

or 1080P 30fps H.264 video clips with audio.
Clear night vision. The E6P, E6PCF and E6P Max models

are equipped with 36pcs high performance infrared no glow
940nm LEDs that function as a flash (invisible to eyes). The
E6PWF is equipped with 36pcs high-performance white
flash LEDs (visible to eyes) .
Easy to use/program with well-designed operation buttons

and built-in 2.4-inch color screen, easy to program, review
pictures and videos on the screen.
3 working modes - Motion detection, Time lapse and

Hybrid.
Fast trigger time - approx. 0.2s, Fast recovery time - 0.5s,

Long trigger distance up to 75ft.
Info strip on each capture: Date, Time, Temperature &

Moon phase.
Operation Hours, Loop Recording, Time Lapse, Password

Protected.
Built for any climate - IP66, Operation Temperature: -4 ~

140°F / -20 ~ 60°C.
E6P,
The

SD/SDHC/SDXC memory card, maximum capacity 512GB
(not included).
4. PARTS AND CONTROLS
The camera is equipped with an antenna, 36pcs IR or White
LEDs, Indicator, Light Sensor, Optical Lens, PIR Sensors,
Lock Holes in front view (Figure 1).
TIP: During use, the black PIR Lens may be dirty or have
scratches, however it does not affect the performance due to
the reliability design. If you must clean it, please try to blow it
off or pick out the dirt very lightly. Please do not try to wipe it,
E6PCF
and
E6PWF
3
models support