Werbung
Verfügbare Sprachen
Verfügbare Sprachen
A power switch is used to power on (ON mode) or off the
camera (OFF mode). A START button is used to quickly
make the camera into the surveillance mode (motion detection)
or time lapse per your settings (Figure 5). When the camera is
in the surveillance mode, press the START button to wake up
the camera.
5. INSTALLING THE BATTERY AND SD CARD
Before you begin learning how to use your camera, you will
first need to insert an SD card (for the E6P, E6PCF and
E6PWF models). Although that may only take you a minute,
there are some important notes about battery and SD card you
should be aware of, so please take the time to read the
following directions and cautions:
5.1. Loading Battery
Check whether the battery pack is correctly installed (Figure
6).
Figure 5: Operation Buttons
7
Surveillance
Mode
Power
Switch
Werbung
