Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7. THE OFF, ON, AND SURVEILLANCE MODES
The camera has three basic operational modes:
OFF mode: Power switch in the OFF position (The camera
is powered off).
ON mode: Power switch in the ON position (The camera is
powered on and its screen is on).
SURVEILLANCE mode: When the camera is powered on,
press START button to enter the surveillance mode. When
the screen is off, the camera enters standby and will perform
according to your settings.
App & Wi-Fi Connection:
You can use the app to connect the camera when the camera is
operating in the ON or SURVEILLANCE mode.
7.1. OFF Mode
The OFF mode is the "safe" mode when any actions must be
taken, e.g., replacing the SD card (for the E6P, E6PCF and
E6PWF models) or battery, or transporting the device. And of
course, when you are storing or not using the camera, you will
switch it to OFF. Please note that in the OFF mode the camera
still consumes a little power. It's a good idea to take the battery
out of the battery compartment if the camera will not be used
for a long time.
7.2. ON Mode
In the ON mode you can check and change the settings of the
camera with the help of its built-in screen. These settings,
found in the menu by pressing MENU key, let you change the
photo or video resolution, interval between photos, switch the
time imprint on, etc. (See more in Section 9 ADVANCED
10
Werbung
