Safety Instructions - Palmer Inn Bedienungsanleitung

USER MANUAL
This symbol indicates hazards caused by hot surfaces.
This symbol indicates hazards due to high volume levels.
This symbol denotes a device that does not contain any user-serviceable parts.
This symbol indicates additional information on the operation of the product.
This symbol indicates a device that may only be used in dry rooms.

SAFETY INSTRUCTIONS

DANGER:
1. Do not open the device, and do not make any modifications to it.
2. If your device no longer functions properly, if liquids or objects get inside it, or if it has been damaged
in any other way, switch it off immediately and disconnect it from the power supply. The device may be
repaired only by authorised repair technicians.
ATTENTION:
1. Do not operate the device if it has been exposed to large temperature fluctuations (for example, after
transport). Moisture and condensation can damage the device. Switch on the device only when it has
reached ambient temperature.
2. Make sure that the voltage and frequency of the mains correspond to the values specified on the
device. If the device has a voltage selector switch, do not turn the device on until it has been set
correctly. Use only suitable mains cables.
3. To disconnect the device completely from the power supply, unplug the mains cable or the mains
adapter from the socket. It is not sufficient to press the on/off switch on the device. In addition, a
connected amplifier must also be disconnected from the device!
4. Make sure that the fuse used corresponds to the type printed on the device.
5. Make sure that appropriate measures have been taken against power surges (for example, lightning
strike).
6. Observe the specified maximum output current on devices with a Power Out connection. Ensure that
the total current consumption of all connected devices does not exceed the specified value.
7. Replace plug-in mains cables with original cables only.
EN
5