C) INSPECTION AND CARE
1. Life span and time to change of construction units, repair hints
The harness SKYLINE Racer was conceived for high loads and extreme demand.
Accordingly with the choice of the materials particularly high criteria were set.
However the life span depends how you handle the harness.
It is recommended to check the harness from time to time and repair damaged
components.
Make sure that defect seams are renewed immediately by an authorized workshop.
We recommend in such a case to send us, Skyline, the harness directly.
avoid to handle with fire and sharp edged articles in direct vicinity of the
harness.
avoid unnecessarily long sun irradiation - because ultraviolet radiation
destroys the molecular structure of the material.
avoid the contact with seawater or acid liquids
remove stains as soon as possible.
2. Maintenance and control
The harness SKYLINE Racer is maintenance-free. Careful processing as well as the
use of high-quality materials is making this harness a very long-lived product.
Regular control in short periods gives you the best guarantee of an unrestricted
function of your harness.
3. Cleaning and care
Never use sharp solvents to clean your harness.
Be decisive of the success of the cleaning is not the detergent but the time after the
cleaning takes place.
Clean your harness with warm water or, with persistent dirt, with a curd soap suds.
4.Compatibility with paragliders
Regarding the compatibility with paragliders does not exist a restriction for the
harness system SKYLINE Racer.
5. Pre-flight check
Before every flight you have to test all seams for damages. You also have to
check the settings of all buckles and trims. Also check fitting of the rescue chute,
fitting of the safety pins and breaking section (thread)!
FOR REPAIR, CHANGES OR INFORMATION
Don't hesitate to contact THE SKYLINE TEAM whenever you want.
skyline-flightgear.de
15
15