SkyLine Racer Handbuch Seite 33

Installation guide
cord as assistance, rubbers,
shackle, neoprene tube
Connect the rescue chute bridle with
the harness bridle- use a 7mm
shackle and fasten with wrench
Put bridles into...
"pilot chute" beside the mainchute
Loop-in handle to "shorter" side of
inner container
Secure shackle with...
...the tubecontainer
2 "inner leafs" of the harness
tubecontainer
skyline-flightgear.de
put "neoprene tube" over harnesses
rescue bridle
... "Neoprene tube"
Put rescue chute into tubecontainer
support cord into the right loop...
9 9