SkyLine Racer Handbuch Seite 35

weave the puller thru the zipper till
the end of the lower part of the
zipper
weave the puller thru the main
zipper to upper end of harness...
put zipper under neoprene fairing
and close with velcros
put main zippers end back into the
harness....finished!
re-weave-in the puller into the lower
part of the main zipper...
...and remove the puller!
put "ears" of the rescue handle into
the 3 "pockets"...
skyline-flightgear.de
... that bridle of the rescue handle is
free
store the puller into small pocket
near shoulder belt
...and secure handle with upper
velcro
11 11