Moving The Appliance; Operation Instructions; Control Panel - Kuppersberg Rbn 1961 Technischer Pass

TECHNICAL PASSPORT
BUILT-IN REFRIGERATOR

MOVING THE APPLIANCE

1. Remove all food from the appli-
ance.
2. Take the power plug off, insert and
fix it into the power plug hook at the rear
or on top of the appliance.
3. Fix parts with tape to prevent
sheves and the door handle from falling
off while moving the appliance.
4. Move the appliance carefully with
more than two person. If move the appli-
ance over a long distance, keep the appli-
ance upright.
5. After installing the appliance, put
the power plug on a socket again.
ATTENTION:
Precautions before operation:
Before making changes the refrigera-
tor must be disconnected.

OPERATION INSTRUCTIONS

CONTROL PANEL

A
Display
1 LED 1:
2 LED 2:
3 LED 3:
38
B
LED 5 LED 6 LED 1
Button
A
B
CHANGING THE LIGHT
 Any replacement or maintenance
of the LED lamps is intended to be made
by the manufacturer, its service agent or
similar qualified person.
 This product contains a light
source of energy efficiency class (G).
ATTENTION:
After connecting the power supply
cord (or plug) to the outlet, wait 2 or
3 hours before you put food into the ap-
pliance. If you add food before the appli-
ance has cooled completely, your food
may spoil.
LED 2 LED 3 LED 4
Fridge compartment setting/Standby mode button
Freezer compartment setting/Vacation mode button
ENGLISH