Silvercrest SOUND MINI Bedienungs- Und Sicherheitshinweise Seite 43

The "primary" unit LED 1 will still be flashing waiting to
o
pair with the playback device . Once the "primary unit"
has successfully paired with the playback device both
the "primary" and "secondary" units can be played and
controlled synchronously during Bluetooth
mode .
Press the
o
connection, the LED 1 on the connected "secondary"
unit flashes and a signal tone sequence sounds .
NOTE: The product which had its
first will become the "primary" unit (in the left audio
channel), and the other unit will then by default becone
the "secondary" unit (in the right audio channnel) .
˜ Cleaning
Switch the product off and remove all cables before
o
cleaning .
Only clean the outside of the product using a clean,
o
dry cloth for cleaning the product and never use any
corrosive liquids / abrasive cleaning agents . Use a
slightly moistened cloth and a mild cleaning agent to
remove stubborn dirt .
When cleaning the speaker, the USB/AUX-IN cover
o
should be closed .)
˜ Storage during non use
Store the product in a dry environment when not in use .
o
Protect it from dust and direct sunlight . The rechargeable
battery needs to be charged regularly .
44 GB/IE
button 3 again to break the TWS pairing
playback
®
button 3 pressed