Silvercrest SOUND MINI Bedienungs- Und Sicherheitshinweise Seite 39

˜ Establishing a Bluetooth
Remove all plugs from the AUX-in jack 10 before you
o
attempt to establish a Bluetooth
Switch on the playback device and make sures its
o
Bluetooth
On the product press the
o
the LED 1 flashes white and a signal tone sequence
sounds . The product will now attempt to connect to the
playback device (e .g . smartphone or computer) .
The product identification on the playback device will be
o
"SOUND MINI" . On the playback device "ACCEPT" the
connection . Please note the requirements of the software
on the playback device .
Once the connection is made the LED 1 will light up
o
white and a signal tone sequence sounds .
The maximum range of the connection is approx . 10 m,
o
but this may be reduced due to the geometry of the
space (obstructing furniture, walls, etc .) .
The playback device must support Bluetooth
o
5 .3 otherwise you may not be able to use all the
functions .
˜ Functions of the buttons
Start a playlist on your playback device .
o
The product has 5 buttons and these control the
o
following functions:
40 GB/IE
mode is on .
®
connection:
®
connection .
®
button 3 for 2 seconds until
standard
®