Silvercrest SOUND MINI Bedienungs- Und Sicherheitshinweise Seite 42

Switch the playback device on and start playback .
o
Set the highest possible volume on the playback device .
o
Then adjust the volume with the +/- buttons
the speaker .
˜ Switching between AUX-in
and Bluetooth
To resume music playback via Bluetooth
o
unplug the AUX cable 14 from the AUX-in jack 10 .
The product will then search for the previously paired
playback device (if any) and re-establish the Bluetooth
connection automatically .
˜ TWS pairing
NOTE: The TWS (True Wireless Stereo) function is only
available if two of these products have been purchased
and both have the same model number .
Turn on both speakers and make sure they are both not
o
connected to another device via Bluetooth® . At this
moment, neither of the speakers is actively coupled with
a playback device .
Press the
o
then by default set it as the "primary" unit . A beep will
sound . When pairing between both products has been
carried out successfully, the LED 1 of the connected
"secondary" unit stops flashing and a sequence of beeps
will sound .
connections
®
button 3 on one of the products which will
6 5
on
connection
®
GB/IE
®
43