Werbung
Set-up instructions
Operate the device only in rooms with at least 20m².
Footprint
Remove all adhesive tapes used for transport securing.
Check that the unit is standing securely on firm, level and dry ground.
Never install the device where it may be exposed to the following conditions:
Heat sources, such as radiators, heat registers, stoves, or other products that
o
generate heat.
In an area where oil or water may be splashed.
o
Direct sunlight
o
Mechanical vibrations or shocks
o
Excessive dust exposure
o
Lack of ventilation, such as in a closet or bookshelf.
o
Uneven surface
o
Make sure that the socket is equipped with an RCD circuit breaker (ground fault circuit in-
terrupter). If you are not sure whether this is the case, you can ask your elec-
trician or use a personal protection plug (available at hardware stores).
use.
Keep at least 50cm distance around the device to walls and objects. Make sure that the air
outlet is free and that there are no curtains or textiles above it.
min. 50cm
EN-11
To save power and avoid potential hazards, unplug the device when not in
min. 50cm
min. 50cm
min. 50cm
www.comedes.com
Werbung
