Assembly Completion; Control Throws - Horizon Hobby Staufenbiel AQUILA Bauanleitung

The Elevator will fit tightly and doesnt need additional secure. If you have the impression that the
elevator does not fit tight enough bend elevator joiner.
Start programming the model in the transmitter. Connect all servo cables according the transmitter
manual and make sure that all servo an rudder working in right direction. We recommend 3 Flight
modes.
The angle of incident shoud be 1.2°. Combined with the recommend CG you will have a high poten-
tial and well balanced glider.
The recommended Center of Gravity (CG) location for your model is 78 - 82 mm back from the lea-
ding edge of the wing against the fuselage.
FUNCTION
Normal / (Brake)
Aileron Up: 12 mm / (12 mm)
Down: 5 mm
Elevator Up: 12 mm
Down: 12 mm / (10 mm)
Rudder Up: 15 mm
Down: 15 mm
Flaps (Down: 20 mm)
Now enjoy the first flight with your new AQUILA. For extra high maneuverability flaps can be added
to the ailerons. We recommend about 50% admixture.
Look forward to many hours with your AQUILA.
Images and Text: S. Hildebrandt
Translation: C. Heintze
Layout: M.P. Münker

ASSEMBLY COMPLETION

CENTER OF GRAVITY (C.G.)

CONTROL THROWS

FLIGHT MODE
Thermal
Down: 2 mm (optional)
/
/
Down: 4 mm
Solder a Multiplex connector at
the end of the cable. Prepare
the opposite part of the con-
nector too.
Speed
Up: 1 mm (optional)
/
/
Up: 3 mm
EN
23