Horizon Hobby Staufenbiel AQUILA Bauanleitung Seite 22

EN
Secure the servo in the mount
using the screws provided with
the servo.
Assemble the pushrods with
clevis and nuts. Tighten the
nuts with pliers and secure it
with thread lock.
Extend the the servocable.
Prepare a small piece of foam
every 5- 10 cm.
Glue the small foam pieces
with CA on the servo cable.
The foam will protect the cable
in the and avoid rattling noises.
Guide the servocable through
the wing.
22