Horizon Hobby Staufenbiel AQUILA Bauanleitung Seite 19

EN
Attach in the back of the ridge
a drive in nut and glue it with
CA Glue.
Glue the ridges with Pattex
Stabilit or Uhu Enfest. (If not
available use 15 min Epoxy)
With this kind of installation the
ESC will be be installed under
the tray.
The battery tray will be srewed
in the fuselage and if needet
easily removed. The ESC is
not visible. After installing the
motor the fuselage is finished.
19