Silvercrest SPUP 3 A1 Bedienungs- Und Sicherheitshinweise Seite 31

approx. 30 seconds in terms of 4 LED indicators
show overall power bank
1 LED light up = 25 %
2 LEDs light up = 50 %
3 LEDs light up = 75 %
4 LEDs light up = 100 %
Note: This is approx percentage of power bank capacity
but not actual measurement.
Charging mobile devices with
the power bank
You can charge up to three devices at the same time using
the power bank
the sum of the output current may not exceed 3 A.
Connect the USB type A to USB type C cable
original charging cable of the device to be charged to one
of the three USB outputs: USB Type C output
Type A output 1
Then connect the USB-C port of the USB type A to USB
type C cable
charged. The charging process will start automatically.
If your mobile device has a USB Type C input, you can
use a Type C to Type C connection cable (not included) to
connect your device's Type C input to this power bank's
USB Type C output
automatically.
1
. If all outputs are used at the same time,
1
or USB Type A output 2
2
to the USB-C input of the device to be
7
. The charging process will start
3
capacity.
to
5
or the
7
, USB
3
.
4
GB/IE 31