Pauses In Use; Setting Down, Transportation And Storage; Park System For Pauses In Vacuuming; Park System For Storage - Miele HS15 Gebrauchsanweisung

en
Pauses in use (dia. 21)
To pause the appliance during
operation:
^ To do this, press the Stand-by button
- on the Comfort handle.
The LED on the Comfort handle will
light up.
,
The Stand-by button is designed
to pause the vacuum cleaner for
short periods of time whilst
vacuuming. After vacuuming the
vacuum cleaner must be switched
off and unplugged from the mains
electricity supply. Otherwise there is
a risk of overheating and damage.
Setting down, transportation
and storage
Park system for pauses in
vacuuming (dia. 24)
(cannot be used with the SEB 236
Electrobrush)
The Park system allows you to
conveniently park the suction tube and
floorhead during pauses.
^ Slot the floorhead into the parking
attachment at the back of the
vacuum cleaner.
If your vacuum cleaner is on a
sloping surface, e.g. a ramp, retract
the electro telescopic tube fully.
38
Switching on and off with the Park
system
The vacuum cleaner switches off
automatically when the floorhead is
slotted into the park system with the
park attachment.
Park system for storage (dia. 25)
,
Always disconnect the vacuum
cleaner from the electrical supply
when you have finished using it.
Switch it off at the wall socket and
unplug it.
^ Stand the vacuum cleaner upright.
Retract the electro telescopic tubes
fully so that the vacuum cleaner takes
up less room for storage.
^ Slot the floorhead downwards into
one of the parking attachments on
either side of the vacuum cleaner
(the parking attachments cannot be
used with the SEB 236 Electrobrush).
This makes the vacuum cleaner easier
to carry or store.